*********** WARNING *********** 
Do NOT CLOSE/ABORT the program when writing the new firmware. Doing so WILL DAMAGE/CORRUPT your Seagull device.
Please follow the instructions thoroughly.
*******************************

Before starting:
Please extract the contents of this file in the root of your harddrive. (ex. drive C:)


When performing the update, please follow these instructions:

1. Disconnect all devices from #GPK2.

2. Connect #GPK2 USB-C port to the USB port of your PC.

3. Launch CONFIG-TOOL --> CONNECT to #GPK2 and RESET SETTINGS. 
After settings have been reset - press READ SETTINGS to make sure that module has finished RESETTING. When confirmed DISCONNECT and close CONFIG-TOOL.

4. Start the "Seagull_Update.exe" program.

5. Follow the instructions within the program.

6. After the update has been completed - POWER CYCLE your #GPK2 module.